Wika S-10 Pressure Transmitter, 0 to 100 psi_1873289
Representative image only

WIKA S-10 Pressure Transmitter, 0 to 100 psi

$3,358.00

The price is inclusive of GST

The WIKA S-10 Pressure Transmitter, 0 to 100 psi (68447-08) is an industrial pressure transmitter with a 0 to 100 psi measuring range, 4 to 20 mA output and ±0.25% BFSL accuracy. This configuration features a 1/2 in NPT(M) process connection, DIN 43650 4-pin electrical connection and stainless-steel wetted parts and housing.

Key Features

  • 0 to 100 psi pressure range for gauge-pressure measurement in industrial systems
  • 4 to 20 mA analogue output for integration with common process and control systems
  • ±0.25% BFSL accuracy for precise pressure measurement
  • 1/2 in NPT male process connection for threaded installation into compatible systems
  • DIN 43650 4-pin electrical connection provides a standard industrial interface
  • 10 to 30 VDC power requirement supports typical industrial control-system supplies
  • IP65 enclosure protection with the specified electrical connector configuration
  • 316 stainless-steel wetted parts provide durable media-contact surfaces
  • 316 stainless-steel housing supports rugged industrial use
  • Medium temperature range from -30 to +100 °C accommodates a broad range of process conditions
  • Resistance to pressure spikes and vibration supports demanding industrial operating environments

Note: The WIKA S-10 has been listed as phase-out by the manufacturer. Contact John Morris Group to confirm current availability or to discuss suitable replacement models.

Benefits

  • Integrate pressure measurements directly into control and monitoring systems using the industry-standard 4 to 20 mA signal.
  • Support hydraulic, pneumatic, pump and compressor applications with a rugged stainless-steel transmitter design.
  • Maintain reliable measurements in installations exposed to vibration and pressure fluctuations.
  • Use the broad process temperature capability across diverse industrial measurement environments.
  • Connect readily to compatible process equipment through the 1/2 in NPT male pressure port.

Why Choose the WIKA S-10 Pressure Transmitter, 0 to 100 psi (68447-08)?

The WIKA S-10 combines a 0 to 100 psi measuring range with 4 to 20 mA output, stainless-steel construction and an industrial DIN electrical connection for process-pressure monitoring. John Morris Group can assist with availability of this phase-out model and selection of an appropriate WIKA replacement where required.

Over 40,000 Customers Trust John Morris