The Scanivalve PDM5016 16-Port Power Distribution Module (PDM5016) supplies 24 VDC power to as many as 16 compatible Scanivalve measurement modules. Its 400 W total output is shared across all ports, while the compact 1U enclosure supports desktop and 19-inch rack-mounted installations.
Key Features
- High-density power distribution, with 16 DC output connections in a single 1U enclosure
- Regulated module power, supplying 24 VDC through each output port
- Shared 400 W output capacity, supporting compatible module combinations within the total power limit
- Universal AC operation, accepting an input range of 90 to 264 VAC
- Wide operating temperature range, supporting use from 0 to 60 °C
- Efficient power conversion, with a typical efficiency of 95%
- Flexible installation, suitable for desktop use or mounting in a standard 19-inch equipment rack
- Compatible module support, designed to power DSA, DTS and ECM modules within the available output capacity
- Space-efficient output connectors, using Amphenol connections selected to accommodate all 16 ports within the 1U form factor
- Central output control, with an illuminated front switch for activating all DC outputs
- Separate mains control, with an additional universal power switch positioned at the rear
- Installation accessories included, supplied with 1U rack ears, rubber feet and mating connectors
Note: Full DC power cable assemblies are sold separately. Cable selection must match the connected Scanivalve module type and the total system load must remain below 400 W.
Benefits
- Consolidates power for multiple measurement modules into one compact supply, reducing the number of individual power units required.
- Supports high-channel-count test systems by providing 16 power connections within only 1U of rack space.
- Simplifies bench and rack integration through the supplied desktop feet and rack-mounting hardware.
- Makes output status easy to identify through the illuminated front-panel power control.
- Provides flexibility to configure compatible DSA, DTS and ECM module combinations within the shared power capacity.
- Helps organise system wiring by centralising DC power distribution for connected Scanivalve equipment.
Why Choose the Scanivalve PDM5016 16-Port Power Distribution Module (PDM5016)?
The Scanivalve PDM5016 provides a compact and centralised power solution for test systems using multiple compatible pressure and temperature measurement modules. Its 16 outputs, 400 W shared capacity and flexible desktop or rack installation make it well suited to high-density system configurations. John Morris Group can assist with selecting compatible DC cables and confirming the total power requirements of your Scanivalve system.
