The Fluid Metering RH Flush Pump, Low Flow (RH1CKCWLF) is an RH series low-flow flush pump configuration for precise valveless piston fluid metering. This configured variant is listed as an RH flush pump with low-flow design, while FMI’s RH platform supports small displacement adjustment from zero to maximum output. The low-flow RH format is suited to controlled fluid handling where low dead volume connection and repeatable metering are required.
Key Features
- Brand: Fluid Metering
- Model / Part Number: RH1CKCWLF
- Product Type: RH low-flow flush pump
- Series: RH
- Configured Variant: Flush pump, low flow
- Low-Flow Configuration: RH-LF style low dead volume pump head configuration
- Low-Flow Port Type: 1/4-28 UNF threaded low-flow ports available for RH pump heads
- Tubing Compatibility: Low-flow ports allow connection to 1/16 inch and 1/8 inch outside diameter microbore tubing and fittings
- Standard RH Tubing Connection: RH pump ports accept 1/4 inch outside diameter tubing and/or tubing adapters
- Dispense Volume Range: 0.003 to 0.2 mL/rev across RH pump head options, dependent on pump head and motor setup
- Flow Rate Range: 0.003 to 520.0 mL/min across RH pump head options, dependent on pump head and motor setup
- Operating Pressure Range: 0 to 25 psig, 0 to 60 psig or 0 to 40 psig depending on RH piston size
- Operating Temperature Range: PVDF and ETFE 0 to 100°C; polypropylene 0 to 80°C
- Operating Motor Speed: 0 to 2600 rpm
- Stroke Adjustment: Adjustable from zero to maximum displacement
- Pump Design: Valveless pump head with no valves to clog or leak
- Drive Compatibility: Compatible with Fluid Metering RH pump drive modules
- Customisation: Flush ports, isolation glands and low-flow 1/4-28 ports are available on RH pump heads
- Regulatory Compliance: RoHS compliant and REACH compliant
Note: Final flow rate, pressure and dispense volume depend on the selected RH pump head configuration, drive module and application conditions.
Benefits
- Supports precise low-flow metering where small-volume control and low dead volume connection are required.
- Helps reduce clogging and maintenance points through a valveless piston-based pumping design.
- Allows controlled output adjustment from zero to maximum displacement for flexible fluid handling.
- Supports microbore tubing workflows through low-flow 1/4-28 connection options.
- Provides a compact RH pump platform for laboratory, analytical, industrial and OEM applications.
Why Choose the Fluid Metering RH Flush Pump, Low Flow (RH1CKCWLF)?
The Fluid Metering RH Flush Pump, Low Flow (RH1CKCWLF) combines an RH pump platform with a configured low-flow flush variant for precise fluid metering applications. Source it through John Morris Group for local support with pump head selection, configuration checks and compatible Fluid Metering drive matching.
