The Revvity Omni GLH 850 Laboratory Homogenizer, 220V (20-020) is an 850 W rotor-stator system for homogenising, dispersing and emulsifying laboratory samples. Its closed-loop digital controller provides operating speeds from 5,000 to 25,000 rpm with accuracy within ±100 rpm of the selected setting. Depending on the installed probe, the instrument can process volumes from less than 200 µL to 5 L.
Key Features
- Powerful 850 W motor, supporting laboratory homogenisation, dispersion and emulsification workflows
- Variable speeds from 5,000 to 25,000 rpm, adjustable in increments of 1,000 rpm
- Closed-loop speed regulation, maintaining the selected speed within ±100 rpm of the original set point
- Broad processing capacity, covering less than 200 µL to 100 mL with Omni Tips and less than 200 µL to 5 L with generator probes
- Digital push-button controls, providing direct adjustment of speed and processing time
- Programmable timer from 1 second to 10 minutes, with a 30-second delayed start for remote operation
- Soft-start operation, providing smoother acceleration and helping minimise splashing during startup
- Wide stainless steel probe compatibility, accepting interchangeable rotor-stator generator probes from 5 to 30 mm diameter
- Plastic and hybrid probe options, supporting compatible 7 mm and 12 mm Omni Tip configurations when the required adapter is fitted
- Compact motor housing, measuring 21.6 cm high by 7 cm in diameter and weighing 1.6 kg
- Operating sound level below 72 dB, with CE and UKCA standards approval
Note: A generator probe is required for operation and is sold separately. The S1000 stand assembly is required for stand-mounted use, while an Omni Tip adapter is required when using compatible plastic or hybrid probes. For research use only. Not for use in diagnostic procedures.
Benefits
- Allows one homogeniser platform to accommodate small-volume samples and preparations up to 5 L through interchangeable probe selection.
- Supports repeatable processing by actively maintaining the selected operating speed.
- Helps reduce sample splashing through controlled soft-start acceleration.
- Enables timed operation in fume hoods or biosafety cabinets through the 30-second delayed-start function.
- Provides flexibility to select stainless steel, disposable plastic or hybrid probes according to the sample and contamination-control requirements.
- Simplifies laboratory operation through integrated digital speed and timer controls.
Why Choose the Revvity Omni GLH 850 Laboratory Homogenizer, 220V (20-020)?
The Revvity Omni GLH 850 Laboratory Homogenizer, 220V (20-020) combines an 850 W motor, closed-loop digital control and broad probe compatibility in a compact rotor-stator platform. John Morris Group supplies this 220 V homogeniser with the stand clamp, cross rod and tool kit for laboratories requiring flexible and controlled sample processing across a wide volume range.
