The Revvity Omni Bead Ruptor 12 Bead Mill Homogenizer (19-050A) is a mid-throughput benchtop instrument for grinding, lysing and homogenising research samples before molecular extraction. It processes sample volumes from 25 µL to 7 mL, accommodating up to 12 x 2 mL tubes or 4 x 7 mL tubes per batch at speeds from 0.8 to 6 m/s.
Key Features
- Mid-throughput batch processing, accommodating up to 12 x 2 mL tubes or 4 x 7 mL tubes
- Broad sample-volume range, supporting preparations from 25 µL to 7 mL in the corresponding tube format
- Adjustable bead-milling speed, operating from 0.8 to 6 m/s in increments of 0.15 m/s
- Flexible processing periods, with timer settings from 1 second to 9 minutes and 59 seconds
- Programmable cycle control, providing 1 to 10 cycles and storage for up to 99 programmes
- Front-loading tube holders, simplifying access when loading and unloading samples
- Patent-pending snap-in carriage, allowing tubes to be secured without screw-down finger plates
- Optimised bead-beating motion, designed to reduce swirling and increase bead impact within the tube
- Inclined carriage configuration, supporting controlled loading and sample-processing operation
- No cool-down requirement, allowing consecutive processing cycles without a specified cooling interval
- Integrated lid locking, securing the processing chamber during operation
- Low-maintenance instrument design, described by Revvity as requiring no routine maintenance
- Broad electrical input, operating from 115 to 230 V at 50/60 Hz
- Compact benchtop construction, measuring 38.1 x 43.2 x 33.0 cm and weighing 29.0 kg
Note: This instrument is for research use only and is not intended for use in diagnostic procedures. Bead kits, processing tubes and other consumables are sold separately unless specifically included in the ordered package.
Benefits
- Processes multiple research samples in parallel to increase throughput over single-tube preparation methods
- Supports grinding, cell lysis and homogenisation across diverse biological and environmental sample types
- Enables repeat workflows to be standardised through stored programmes, cycle settings and dwell control
- Provides selectable speed and timing parameters for different sample materials and disruption requirements
- Simplifies routine tube changes through the front-loading, snap-in carriage design
- Supports genomic DNA, RNA and protein extraction workflows by preparing samples before downstream molecular analysis
- Allows consecutive runs without a manufacturer-specified cool-down period
Why Choose the Revvity Omni Bead Ruptor 12 Bead Mill Homogenizer (19-050A)?
The Revvity Omni Bead Ruptor 12 combines medium-throughput tube capacity with programmable speed, time and cycle control in a compact benchtop instrument. Its optimised carriage motion and compatibility with 2 mL and 7 mL processing formats support varied grinding, lysis and homogenisation workflows. John Morris Group can assist with selecting suitable tubes, bead kits and sample-preparation consumables.
