Gilson PIPETMAN G P10G Pipette, Manual Air Displacement, 1-10 μL, Metal Ejector_1184712
Gilson PIPETMAN G P10G Pipette, Manual Air Displacement, 1-10 μL, Metal Ejector_1184712
Gilson PIPETMAN G P10G Pipette, Manual Air Displacement, 1-10 μL, Metal Ejector_1184712
Gilson PIPETMAN G P10G Pipette, Manual Air Displacement, 1-10 μL, Metal Ejector_1184712
Representative image only

Gilson PIPETMAN G P10G Pipette, Manual Air Displacement, 1-10 μL, Metal Ejector

$569.13

$711.43
21% Discount
The price is inclusive of GST
Gilson Maximum Permissible Errors, Random Error, at 1µl volume≤0.012µl
Gilson Maximum Permissible Errors, Random Error, at 10µl volume≤0.040µl
Gilson Maximum Permissible Errors, Random Error, at 5µl volume≤0.030µl
Gilson Maximum Permissible Errors, Systematic Error, at 1µl volume±0.025µl
Gilson Maximum Permissible Errors, Systematic Error, at 10µl volume±0.100µl
Gilson Maximum Permissible Errors, Systematic Error, at 5µl volume±0.075µl
Volume Range1µl to 10µl
Gilson Pipetman G Brochure
Gilson 2014 Manual Liquid Handling catalogue
Gilson Pipetman G Features & Benefits
Pipetman Users Guide
Overview

 

THE NEW PIPETMAN® G: Premium Pipetting Comfort!PIPETMAN G is a new mechanical, air-displacement pipette from Gilson.

PIPETMAN G offers you the LOWEST pipetting force on the market thanks to a new easy glide piston displacement that gives ideal pipetting and purge sensations.

Enjoy a new addition to PIPETMAN line with its legendary accuracy, precision, and robustness…with the highest comfort!

 

 

Your Benefits

  • Take a step forward in comfort
    • Redesigned piston assembly: new seal, lighter springs and high quality of grease to enjoy the lowest pipetting force available on the market!
    • Fulfils all expectations in terms of pipetting comfort even for intensive routine.
  • Keep your usual gesture
    • Same pipetting gesture as PIPETMAN Neo or Classic.
    • Ratio between pipetting and purge forces is maintained.
  • Choose its look: Classic or modern design
    • Stainless steel or plastic ejectors are available. They are both equipped with a clip ejector for an easy and safe access to the serviceable part.
    • Plastic ejector recommended when working with corrosive liquid.
  • Easy identification
    • A blue ring positioned under the thumbwheel allows to identify PIPETMAN G and to distinguish it from the Classic and Neo models.

Reliability
Gilson's standards are even more stringent than those required by governing bodies: On average, PIPETMAN permissible errors are 2 times better than those recommended by ISO 8655!

Our pipette manufacturing plant has its own accredited calibration laboratory to control the accuracy and precision of each and every Gilson pipette. Gilson pipettes are individually calibrated and delivered with a performance check report. Each pipette bears an engraved identification number for traceability.

Decontamination & Autoclaving
Your pipette could be contaminated accidentally. The most frequently contaminated pipette parts are the tip-ejector and tip-holder.

For this reason, each and every Gilson PIPETMAN has autoclavable lower parts.

Autoclaving
Tip-ejector, tip-holder and connecting nut can be sterilised in the laboratory under the following conditions: Moist heat/121°C/20 minutes/1 bar.

Decontamination
For maintenance and decontamination procedures, please refer to the related PIPETMAN user's guide.

Service
Gilson believe that the quality of their pipettes must be matched by the quality of their service. That is why John Morris Scientific operate a Gilson-authorised service centre. This repair and calibration centre duplicates the conditions of Gilson's own factory, with controlled environments and regular inspections. Qualified technicians at our centre, having completed extensive training by Gilson, are specialists in the repair, calibration, and operation of Gilson products.

Compliance with Standards
ISO standards and Good Laboratory Practice (GLP) require that laboratories perform regular inspections and calibration certification. Whatever your requirements - ISO standards, GLP guidelines, metrology - our specialists can help you implement procedures that are suitable for your applications.

 

 


 

 

Over 40,000 Customers Trust John Morris