Seta Auto-Oxi system provides automatic monitoring of up to 4 pressure test vessels and is designed for use with all water or dry block temperature baths that conform to the test method specifications. High quality pressure transducers and system components ensure reliable operation and fully traceable results. The Auto-Oxi system is supplied programmed with pressure/time test profiles for ASTM D525, D873, IP 40 and ISO 7536 allowing rapid test selection and start. Alternatively custom test profiles are easily programmed by the user via the ‘Settings’ tab on the display screen. Sample/operator details can also be input.
The recorded pressure status of each test vessel being monitored is displayed and the software automatically follows the pressure check and test sequence laid down in the test method, the display shows the ongoing test status of each vessel as well as the duration of the test remaining.
Once a test is started the system is designed for unattended operation and automatically reports the induction period (pressure drop) of each sample under test.
Sample data is stored by the software and is quickly accessed via the ‘Data’ tab on the display screen; results can be printed or downloaded via a USB interface. The Seta Auto-Oxi control system will operate with earlier Seta oxidation baths and can also be used to update the performance of most other oxidation baths.
SUPPLIED WITH: Oxi-Data software, USB Hub, USB Thermometer, Data cable & power supply.
