The Scanivalve RPM4000-DC RAD Power Module, DC Input (RPM4000-DC / 21380) is a DC-to-DC power module for a compatible RADBASE4000 or single E-RAD4000 system. It accepts a 9-36 VDC input rated at 44 VA and provides the +15 VDC, -15 VDC and +5 VDC power outputs required by the RAD system.
Key Features
- Wide 9-36 VDC input range, supporting integration with varied DC power supplies used in mobile and fixed test installations
- Forty-four-VA input rating, matching the manufacturer-specified requirement for the DC-input module
- Multiple regulated RAD power outputs, providing +15 VDC, -15 VDC and +5 VDC connections
- Designed for compatible RAD systems, providing a dedicated DC power option for RADBASE4000 and single E-RAD4000 installations
- Rugged circular input connector, using a Bendix PT02A-8-3P connection for incoming DC power
- Dedicated RAD output connector, using a Bendix PT02A-16-8S connection for system power distribution
- Integrated power switch, allowing local control of the module
- Green power-status indicator, providing a visible indication that the unit is energised
- Mounting-plate construction, with four slotted mounting points for secure installation
- Compact overall dimensions, measuring 172.97 x 95.0 x 50.50 mm
Note: The RPM-to-RAD power cable is sold separately.
Benefits
- Allows a RADBASE4000 measurement system to operate from an available DC supply rather than an AC mains source.
- Supports automotive, mobile and flight-test installations where a broad DC input range is beneficial.
- Simplifies RAD system integration by providing the required positive, negative and logic-voltage output rails in one module.
- Provides straightforward local operation and status checking through the power switch and green indicator.
- Supports secure installation in compact test assemblies through its mounting plate and slotted fixing points.
Why Choose the Scanivalve RPM4000-DC RAD Power Module, DC Input (RPM4000-DC / 21380)?
The RPM4000-DC provides a manufacturer-defined DC power solution for compatible RADBASE4000 and E-RAD4000 installations. Its 9-36 VDC input range, dedicated RAD output connector and compact mounting format make it suitable for test environments where conventional AC power may not be practical. John Morris Group can assist with confirming system compatibility and selecting the required Scanivalve power cable and accessories.
