The MKS GE50A MFC, N2, 1000 sccm, 1/4 in Swagelok (GE50A013103SBV020) is an elastomer-sealed digital mass flow controller configured for nitrogen flow control to 1000 sccm. This variant includes 1/4 in Swagelok fittings, 0 to 5 VDC 15-pin analogue I/O, Viton seal material and a normally closed valve.
Key Features
- Product type: Elastomer-sealed digital mass flow controller
- Model: GE50A
- Configured gas: Nitrogen, N2
- Full scale flow: 1000 sccm
- Control range: 2% to 100% of full scale
- Fitting configuration: 1/4 in Swagelok
- I/O configuration: Analogue 0 to 5 VDC, 15-pin Type D male connector
- Seal material: Viton
- Valve type: Normally closed
- Typical accuracy: ±1% of reading for 20 to 100% full scale; ±0.2% of full scale for 2 to 20% full scale
- Repeatability: ±0.3% of reading
- Typical controller settling time: Less than 750 ms, typical above 5% full scale
- Input power: +15 to +24 VDC at less than 4 W
- Operating temperature: 10 to 50 °C ambient
Note: Confirm gas and elastomer compatibility before use if the controller is reconfigured for gases other than the specified N2 configuration.
Benefits
- Supports precise nitrogen flow control for process gas and laboratory flow applications.
- Provides setpoint-based control accuracy for consistent and repeatable process conditions.
- Uses a standard GE50A footprint to support replacement or integration without modifying many existing gas line layouts.
- Offers analogue 0 to 5 VDC control through a 15-pin connector for integration with compatible control systems.
- Helps reduce inventory requirements through the GE50A embedded interface for device range and user gas configuration.
- Combines metal wetted surfaces with minimal elastomer use for general-purpose flow control applications.
Why Choose the MKS GE50A MFC, N2, 1000 sccm, 1/4 in Swagelok (GE50A013103SBV020)?
Choose the MKS GE50A MFC when your process requires a configured nitrogen mass flow controller with 1000 sccm full-scale flow, 1/4 in Swagelok fittings and analogue 15-pin connectivity. John Morris Group supplies MKS mass flow measurement and control instruments for industrial, research and laboratory applications across Australia.
