The MKS 627H Heated Capacitance Manometer, 0.1 Torr, Horizontal (627H.1TBD6B) is a heated absolute Baratron capacitance manometer for direct total pressure measurement independent of gas composition. This 45 °C model has a 0.1 Torr full-scale range, 8 VCR female fitting, 15-pin Type D connector with thread locks, 0 to 10 VDC pressure output, heater status LEDs and horizontal calibration.
Key Features
- Brand: MKS
- Model: 627H
- Manufacturer Part Number: 627H.1TBD6B
- Product Type: Heated absolute Baratron capacitance manometer
- Measurement Type: Absolute pressure
- Full Scale Range: 0.1 Torr
- Sensor Temperature: 45 °C
- Accuracy: 0.15% of reading
- Resolution: 0.001% of full scale
- Pressure Output Signal: 0 to 10 VDC, linear with pressure
- Fitting: Swagelok 8-VCR female
- Electrical Connector: 15-pin Type D with thread locks
- Status Indicators: Heater failure and heater temperature status LEDs
- Calibration Orientation: Horizontal calibration
- Materials Exposed To Gases: Inconel and Incoloy
- Ambient Operating Temperature: 15 °C to 40 °C
- Zero Temperature Coefficient: 0.005% of full scale/°C
- Span Temperature Coefficient: 0.02% of reading/°C
- Response Time: <20 msec
- Warm-Up Time: 8 hours for 0.1 Torr units
- Overpressure Limit: 45 psia (310 kPa)
- Internal Volume: 6.3 cc
- Input Power Required: ±15 VDC ±5% at 0.25 A maximum
- Compliance: CE and RoHS
Benefits
- Measures total pressure directly and independently of gas composition for reliable low-pressure vacuum monitoring.
- 45 °C heated operation helps reduce the effects of ambient and process temperature variation in process line environments.
- 0.1 Torr full-scale range supports sensitive low-pressure measurement applications.
- Heater status LEDs provide clear indication of heater temperature and heater failure status.
- 0 to 10 VDC linear pressure output supports integration with compatible readout, control and data acquisition systems.
- Inconel and Incoloy wetted materials support use with corrosive or dirty gases when compatible with the process conditions.
- Horizontal calibration supports installations where this orientation is required for best measurement accuracy.
Why Choose the MKS 627H Heated Capacitance Manometer, 0.1 Torr, Horizontal (627H.1TBD6B)?
The MKS 627H Heated Capacitance Manometer, 0.1 Torr, Horizontal (627H.1TBD6B) provides verified absolute pressure measurement with 0.1 Torr full-scale range, 45 °C heated operation, 8 VCR female fitting, 15-pin Type D connector with thread locks, heater status LEDs and horizontal calibration. John Morris Group supplies this MKS Baratron manometer for laboratories and process environments requiring reliable low-pressure vacuum measurement equipment backed by specialist scientific equipment support.
