The Merck Milli-Q IQ 7003 Pure & Ultrapure Water System (ZIQ7003T0C) produces Type 2 pure water and Type 1 ultrapure water directly from potable tap water. It provides a 3 L/h Type 2 production flow and Type 1 dispensing at up to 2 L/min for analytical, life science and general laboratory workflows.
Key Features
- High-quality Type 1 ultrapure water, with 18.2 MΩ·cm resistivity, 0.055 µS/cm conductivity at 25 °C and TOC of 5 ppb or lower
- Consistent Type 2 pure water, with resistivity above 5 MΩ·cm, conductivity below 0.2 µS/cm at 25 °C and TOC of 30 ppb or lower
- Flexible point-of-delivery configuration, supporting up to four E-POD or Q-POD dispensers with dispensing from drop by drop to 2 L/min
- Multi-stage water purification, combining IPAK Gard pretreatment, reverse osmosis, Elix electrodeionisation, IPAK Quanta polishing and mercury-free UV technology
- Protected pure-water storage, with compatible 25 L, 50 L and 100 L intelligent tanks featuring an integrated vent filter and bactericidal UV lamp
- Continuous organic contamination monitoring, using an integrated A10 online TOC monitor
- Automatic rinsing before production, helping ensure that only purified water meeting system requirements enters the storage tank
- Intuitive touchscreen operation, with a 5-inch HD capacitive display on each POD for dispensing, system control and water-quality monitoring
- Connected system management, with USB, Ethernet, RFID consumable identification and MyMilli-Q remote monitoring capabilities
- Paperless data traceability, providing access to system performance, water-quality records, alerts and operating history
- Space-saving installation options, allowing the 49.8 × 31.5 × 38 cm purification unit to be installed on the bench, under the bench or on a wall
- Reduced environmental impact, with mercury-free UV lamps, LabClose hibernation mode and Merck Greener Alternative Product classification
Note: A country-specific box containing the appropriate power cord and local-language manual must be ordered separately. Consumables, accessories, storage tanks, POD dispensers and installation services are not included under this catalogue number unless specifically quoted.
Benefits
- Supports sensitive HPLC, UHPLC, LC-MS, ion chromatography, GF-AAS and ICP workflows with consistently high-quality ultrapure water.
- Provides pure water for buffer, reagent, culture-media, histology and staining-solution preparation from the same system.
- Enables convenient water access at multiple laboratory benches without locating the main purification unit at every dispensing point.
- Saves valuable workspace through flexible benchtop, underbench and wall-mounted configurations.
- Simplifies audit preparation and laboratory data management through digital records, remote access and consumable traceability.
- Helps maintain stable water quality while reducing routine maintenance and unnecessary energy consumption.
Why Choose the Merck Milli-Q IQ 7003 Pure & Ultrapure Water System (ZIQ7003T0C)?
The Merck Milli-Q IQ 7003 combines Type 1 and Type 2 water production, intelligent dispensing and connected data management in one flexible laboratory system. John Morris Group can assist with configuration review, compatible storage and dispensing options, installation requirements and ongoing consumable planning for ZIQ7003T0C.
