The Justrite 2 Gallon Disposal Can with Stainless Steel Fittings (TF12752; Cole-Parmer 12030-72) is a polyethylene quick-disconnect safety can designed for hands-free collection of HPLC solvent waste. Two stainless steel disconnect fittings provide one intake and one vent connection for 3/8 inch tubing, helping control liquid flow and vapour while allowing spill-resistant container changeout.
Key Features
- 2 gallon waste capacity, equivalent to 8 L for routine HPLC solvent collection
- Hands-free solvent collection, suitable for pump-fed or gravity-flow HPLC waste methods
- Two quick-disconnect fittings, providing one intake connection and one vent connection
- Automatic fitting closure, with valved connections that seal when decoupled to help prevent liquid and vapour release
- Stainless steel disconnect construction, fitted with PTFE O-rings for chemical-handling applications
- Connections for 3/8 inch tubing, supporting integration with compatible laboratory waste lines
- Translucent polyethylene container, allowing the liquid level to be checked without opening the can
- Stainless steel flame arrester, dissipating heat at the pouring spout to help prevent flashback ignition
- Spring-loaded sealed lid, automatically venting to guard against pressure build-up
- Quick-disconnect changeout, allowing the container to be removed without disconnecting tubing from the HPLC process
- FM-approved safety design, with confirmed OSHA compliance and NFPA Code 30 compliance
- Compact round configuration, measuring 14.75 inches high by 12 inches outside diameter
Note: A coalescing carbon filter and compatible spill basin are optional accessories and are not included with the disposal can.
Benefits
- Allows a full waste container to be exchanged without removing tubing from the connected HPLC system.
- Reduces the potential for spills, drips and vapour release by automatically sealing the fittings when disconnected.
- Helps eliminate back pressure in the disposal line through separate intake and vent connections.
- Enables quick visual checks of the collected liquid level through the translucent container wall.
- Supports safer solvent-waste handling through automatic venting and a stainless steel flame arrester.
- Accommodates either pump-fed or gravity-fed waste collection for flexible laboratory installation.
Why Choose the Justrite 2 Gallon Disposal Can with Stainless Steel Fittings (TF12752; Cole-Parmer 12030-72)?
The Justrite 2 Gallon Disposal Can with Stainless Steel Fittings (TF12752; Cole-Parmer 12030-72) combines hands-free HPLC waste collection with valved quick-disconnects, automatic venting and a translucent polyethylene body. John Morris Group can assist with confirming tubing, filter and spill-containment requirements for laboratory solvent-waste systems across Australia.
