The IDEX FEP Tubing Sleeve, Blue, 0.033" ID x 1/16" OD (F-267B, Cole-Parmer item 02018-13) is designed to adapt 785-825 µm OD capillary tubing to compatible 1/16" fluidic connections. Manufactured from blue FEP, it provides a concentric connection with minimal dead volume and is pressure rated to 4000 psi (276 bar).
Key Features
- Highly inert FEP construction, providing a fluidic sleeve material suitable for compatible analytical applications
- Blue colour coding, making the F-267B sleeve size easier to identify during installation
- 0.033" internal diameter, sized for capillary tubing with an outside diameter of 785-825 µm
- Standard 1/16" outer diameter, allowing the capillary tubing to interface with compatible standard fluidic connections
- 4000 psi pressure rating, equivalent to 276 bar for the exact F-267B configuration
- 2" sleeve length, providing the specified connection geometry
- Designed for improved concentricity, helping maintain alignment between the capillary tubing and receiving port
- Easy capillary tubing insertion, supported by the FEP sleeve construction
- Separate sleeve design, allowing adaptation to different tubing pocket depths to help minimise dead volume
- Designed for use with the IDEX A-350 cutter, as specified by the manufacturer
Note: This product has been listed as obsolete by the manufacturer with no direct substitute. Contact John Morris Group to confirm current availability or discuss suitable alternatives.
Benefits
- Helps create a concentric capillary connection while reducing unnecessary dead volume within the receiving port.
- Adapts 785-825 µm capillary tubing to a standard 1/16" outside diameter connection format.
- Simplifies identification of the required sleeve size through the manufacturer's blue colour coding.
- Allows the sleeve to accommodate varying tubing pocket depths because it is not permanently attached to a ferrule.
- Supports demanding fluidic connections with an exact manufacturer-rated pressure capability of 4000 psi.
Why Choose the IDEX FEP Tubing Sleeve, Blue, 0.033" ID x 1/16" OD (F-267B)?
The IDEX F-267B provides a purpose-sized FEP sleeve for connecting 785-825 µm OD capillary tubing while maintaining good concentricity and low dead volume. Its blue identification, 1/16" OD format and 4000 psi pressure rating make it a defined connection component for compatible analytical fluid paths. John Morris Group can assist with confirming remaining availability or identifying an alternative where this obsolete part can no longer be supplied.
