The IDEX Bottle Cap Assembly, GL-45, 1/8 in Tubing (A-620 / 02033-28) is designed for standard GL-45 1 L bottles and provides simple fluid connections without threaded ports or fittings. It combines two press-fit connections for 1/8 in OD tubing with a third female slip-luer connection and is manufactured from ETFE and polypropylene.
Key Features
- Compatible with standard GL-45 bottles, including the 1 L bottle format specified by IDEX
- Two press-fit tubing connections, accepting 1/8 in OD tubing without threaded fittings
- Third luer taper connection, providing an additional connection point for compatible male luer fittings
- Three-hole cap configuration, with two straight-through tubing holes and one luer connection
- Female slip-luer port design, allowing a compatible male luer such as a luer-lock syringe to fit into the third opening
- ETFE and polypropylene construction, providing the specified wetted cap materials for this assembly
- Simple push-through tubing installation, eliminating the need for threaded ports or separate tubing fittings
- 10 psi maximum safety limit, with IDEX instructing users not to exceed this pressure during use
Note: This product has been listed as discontinued by the manufacturer. Contact John Morris Group to confirm current availability or to discuss suitable alternatives.
Benefits
- Simplifies fluid-line setup by allowing 1/8 in tubing to pass directly through the cap without additional threaded fittings.
- Provides flexible connection options through the combination of two tubing openings and a dedicated luer port.
- Supports laboratory solvent-handling setups with ETFE and polypropylene cap materials.
- Fits standard GL-45 1 L bottles, making it suitable for common laboratory reservoir configurations.
Why Choose the IDEX Bottle Cap Assembly, GL-45, 1/8 in Tubing (A-620 / 02033-28)?
This IDEX bottle cap assembly provides a straightforward way to connect 1/8 in tubing to a standard GL-45 1 L bottle while retaining an additional luer connection. Its simple three-hole design reduces the need for extra fittings and supports flexible fluidic configurations. Contact John Morris Group to confirm availability of this discontinued IDEX component or to discuss alternatives.
