The IDEX 100 µL Stainless Steel Sample Loop for 7125/7010 (7024; Cole-Parmer item 02016-37) is designed for use with 7125 and 7010 injection valves. Manufactured from 316 stainless steel, it provides a nominal 100 µL sample volume with 1/16 in OD x 0.020 in ID tubing and a 20° port angle for correct alignment with the compatible valve ports.
Key Features
- 100 µL nominal sample volume, providing a defined sample loop capacity for injection workflows
- Designed specifically for 7125 and 7010 valves, with geometry configured to match their injection ports
- 316 stainless steel construction, providing high pressure resistance and low permeability
- 1/16 in outside diameter tubing, with a 0.51 mm (0.020 in) internal diameter
- 20° port angle, matching the connection geometry required by compatible injection valves
- Square-cut, burr-free tube ends, supporting a firm and flush connection at the valve ports
- Unswaged stainless steel fittings, allowing the tubing to be fully bottomed in the injection port before the ferrule is swaged
- Two fittings with ferrule supplied, providing the required connection hardware with the sample loop
Benefits
- Supports repeatable sample loading and injection with a defined nominal 100 µL loop volume.
- Helps achieve a secure valve connection through square-cut, burr-free tubing ends.
- Allows correct positioning of the tubing before ferrule swaging because the fittings are supplied unswaged.
- Provides a durable stainless steel fluid path with low permeability for chromatography applications.
- Simplifies replacement or configuration of compatible 7125 and 7010 injection valves with the required fittings supplied.
Why Choose the IDEX 100 µL Stainless Steel Sample Loop for 7125/7010 (7024)?
The IDEX 7024 sample loop provides the verified 100 µL capacity, stainless steel construction and 20° connection geometry required for compatible 7125 and 7010 injection valves. Its 1/16 in OD x 0.020 in ID tubing, carefully finished ends and unswaged fittings support dependable installation and sample handling. John Morris Group supplies this IDEX sample loop for chromatography systems requiring the 7024 configuration.
