The GUNT DIN 50101 T1 WP 310.10 accessory for the WP 310 experimental unit allows investigation of material properties of thin sheet metal through practical cupping experiments. This setup enables students and engineers to analyze the behavior of metal specimens under deformation.
Product Features
- Accessory for WP 310 experimental unit for cupping tests on thin sheet metal
- Includes a punch, hold-down clamp, die, and mirrored cylinder for observation
- Assembled test device is installed in the compression area of WP 310, between bottom crossbar and crosshead
- Specimens are clamped between the die and hold-down device and deformed using a spherical drawing punch
- Mirror allows observation from below to see exactly when cracks start
- Capable of testing thin sheet metal up to 2 mm thickness
- Depth of deformation in mm serves as a standard for cold formability
- Analyses include type of rupture and surface structure of the sagging area
- Set includes one specimen each of aluminium, copper, brass, and steel
Benefits
- Allows precise evaluation of cold formability of thin sheet metal
- Supports practical, hands-on learning and research in material science
- Standardized setup ensures reproducible and accurate experimental results
- Mirror observation enhances understanding of material failure and crack formation
- Includes a variety of metal specimens for comprehensive testing
Why Choose GUNT DIN 50101 T1 WP 310.10, Cupping Tests?
This experimental setup provides a reliable and standardized solution for cupping tests on thin sheet metal using the WP 310 unit, enabling detailed analysis of deformation, rupture, and cold formability for educational and research purposes.
