The Cole-Parmer WB-300-24 Digital Water Bath, 24 L (12122-81) is a general-purpose laboratory water bath with a stainless steel tank, digital temperature control and 230 VAC operation. It provides 24 L reservoir capacity, ambient +5°C to 99.9°C temperature range and ±0.5°C temperature stability for routine sample warming and temperature maintenance.
Key Features
- Product Type: Digital water bath
- Model: WB-300-24
- Previous Part Number: SWB24D
- Reservoir Capacity: 24 L
- Temperature Range: Ambient +5°C to 99.9°C
- Maximum Temperature: 99.9°C
- Temperature Stability: ±0.5°C
- Temperature Control: Digital display with analog dial
- High-Temperature Cutoff: Yes
- Low Water Level Sensor: Yes
- Drain Valve: Yes
- Wetted Material: Stainless steel
- Power Supply: 230 VAC, 50 Hz
- Heater Power: 1400 W
- Internal Dimensions: 300 x 500 x 200 mm (W x D x H)
- Overall Dimensions: 335 x 584 x 280 mm (W x D x H)
- Net Weight: 12.8 kg
- IP Rating: IP31
- Included: Polycarbonate lid and power cord with plug
Note: This model is for international use. The Stuart SWB24D has been rebranded as the Cole-Parmer WB-300-24.
Benefits
- Makes set point adjustment straightforward with an analog dial and clear digital temperature display.
- Helps protect samples and equipment with low water level sensing and overtemperature protection.
- Supports easier cleaning with a stainless steel tank, rounded corners and a heater mounted beneath the tank.
- Simplifies water changes and maintenance with an integral drain valve.
- Reduces heat loss while allowing visibility of bath contents through the included polycarbonate lid.
- Maintains continuity for users replacing the previous Stuart SWB24D model under the Cole-Parmer WB-300-24 name.
Why Choose the Cole-Parmer WB-300-24 Digital Water Bath, 24 L (12122-81)?
Choose the Cole-Parmer WB-300-24 Digital Water Bath, 24 L (12122-81) when you need a 24 L stainless steel bath for routine laboratory heating with practical safety and cleaning features. John Morris Group supplies Cole-Parmer water baths for Australian laboratories requiring verified specifications, compatible accessories and local procurement support.
