The Cole-Parmer BH-250D-3 Dry-Block Heater, 100 °C (36620-04) is a triple-insert digital dry-block heater for dry, constant-temperature laboratory heating. This 230 VAC model accepts three single-width insert blocks and provides digital control up to 100 °C for tubes, vials and plate-based workflows.
Key Features
- Product type: digital dry-block heater
- Model: BH-250D-3
- Cole-Parmer item: EW-36620-04
- Previous part number: DB100/3
- Number of blocks: 3 single-width blocks
- Control type: digital, 100 °C
- Maximum temperature: 100 °C / 212 °F
- Working temperature range: ambient +5 °C to 100 °C
- Set point resolution: 0.1 °C
- Power supply: 230 VAC, 50/60 Hz
- Power: 450 W
- Heat-up time: 25 °C to 100 °C in 7 minutes
- Temperature stability: ±0.1 °C at 37 °C
- Uniformity: 0.2 °C within the block at 37 °C; 0.5 °C between blocks at 37 °C
- Display: 5-digit LED
- Timer: 1 minute to 100 hours in 1-minute increments
- Dimensions: 11 in W x 10 1/4 in D x 4 1/8 in H / 279 x 260 x 105 mm
- Included: block extraction tool and power cord with UK and European plug
Note: Insert blocks are selected separately to suit the required sample tubes, vials or plates.
Benefits
- Provides a dry, constant-temperature heat source for routine laboratory and research applications.
- Supports higher-throughput sample heating with capacity for three single-width heating blocks.
- Allows quick temperature setting and viewing through a bright 5-digit LED display.
- Supports timed workflows with a countdown timer that beeps and then allows the unit to cool toward ambient temperature.
- Helps dissipate heat from the outer surfaces using vented side panels designed for safer handling.
- Supports tube, vial and plate formats through the compatible interchangeable block system.
- Helps users cross-reference legacy Techne DB100/3 installations to the current Cole-Parmer BH-250D-3 model.
Why Choose the Cole-Parmer BH-250D-3 Dry-Block Heater, 100 °C (36620-04)?
Choose the Cole-Parmer BH-250D-3 when you need a triple-insert digital dry-block heater with 100 °C control, 230 VAC operation and interchangeable block flexibility. John Morris Group supplies Cole-Parmer laboratory heaters for Australian laboratories requiring reliable dry heating for tubes, vials and plates.
