The Scanivalve 4-Port Power Distribution Module, 1U (PDM5004) provides 24 VDC power to as many as four compatible Scanivalve devices from one compact supply. It delivers a shared total output of 475 W and can be configured for desktop use or installation in a standard 19-inch equipment rack.
Key Features
- Four independently controlled output ports, allowing as many as four compatible Scanivalve devices to be powered from one unit
- 24 VDC power at every output, providing the required DC supply for supported pressure, temperature and control modules
- Shared total output of 475 W, distributing the available power capacity across the four connected ports
- Wide AC input compatibility, accepting 90 to 264 VAC at 50 to 60 Hz
- Individual illuminated power switches, providing separate on and off control for each output port
- Universal rear power switch, enabling overall control of the power distribution module
- Compact 1U construction, measuring 431.80 x 206.20 x 44.44 mm in its desktop configuration
- Desktop or 19-inch rack installation, with rubber feet and rack-mounting ears supplied as standard
- Operating range from 0 to 60 °C, with a stated typical efficiency of 95%
- Established Amphenol output connection, using the same connector format found on Scanivalve PDM1500, PDM3200 and PDM3200-RM supplies
- Compatible with multiple Scanivalve families, including DSA3000, DSA3200, DSA-PTP, DSA5000, DTS3250, DTS4050, DSM4000, ECM4000 and MPS4200 modules
- Supplied with four mating connectors, supporting assembly of suitable module power cables
Note: Full DC power cable assemblies are sold separately and should be selected for the Scanivalve devices being connected.
Benefits
- Consolidates power for as many as four Scanivalve modules into one compact unit, reducing the number of separate power supplies required.
- Allows each connected device to be switched independently without interrupting power to the remaining modules.
- Supports both benchtop systems and permanent rack installations using the included mounting accessories.
- Simplifies upgrades from the discontinued PDM3200 and PDM3200-RM through a single replacement configuration.
- Supports mixed Scanivalve systems by powering compatible pressure scanners, temperature scanners and control modules from the same supply.
Why Choose the Scanivalve 4-Port Power Distribution Module, 1U (PDM5004)?
The PDM5004 provides a compact and flexible way to distribute 24 VDC power across multiple compatible Scanivalve devices while retaining individual control of every output. John Morris Group can assist with confirming module compatibility and selecting the separate DC power cables required for your system.
