Setaramp Controller is a plug-in automated temperature control unit which is powered from the host flash point tester to override the testers' own controller.
The start temperature, rise rate (°C/min) and test temperature interval (°C) are entered by the operator via a keypad. A digital display shows the parameters set, and the temperature of the sample. An audible prompt is given at each test temperature interval.
Note: Probe assembly (13664-0 or 13815-0) must be ordered for operation.
Note: Ramp temperature may be difficult to control during Cleveland tests when testing liquids with a viscosity >800cSt at 25°C
