Masterflex L/S® Digital Precision Modular Drive with Remote I/O and Benchtop Controller, 1 to 100 rpm; 90 to 260 VAC_1098940
Representative image only

Masterflex L/S® Digital Precision Modular Drive with Remote I/O and Benchtop Controller, 1 to 100 rpm; 90 to 260 VAC

$7,876.35

The price is inclusive of GST
Control typeDigital Variable Speed
Controller Height (InchShort)5.5
Controller Height (mm)140
Controller IP ratingIP 33
Controller Length (InchShort)10.3437
Controller Length (mm)263
Controller Width (InchShort)8.3281
Controller Width (mm)211
DescriptionL/S Precision Modular Drive w/ Remote I/O; 100 rpm
Drive Height (InchShort)
Drive Height (mm)
Drive IP ratingIP 33
Drive Length (InchShort)
Drive Length (mm)
Drive Width (InchShort)
Drive Width (mm)
Housing MaterialABS Plastic and Aluminum Controller; Painted Steel Drive
Max Flow Rate (mLmin)580
Max RPM (rpm)100
Min Flow Rate (mLmin)0.06
Min RPM (rpm)1
Motor (watts)75
Motor Height (InchShort)4.5
Motor Height (mm)115
Motor hp1/10
Motor IP ratingIP 33
Motor Length (InchShort)10.75
Motor Length (mm)273
Motor Width (InchShort)3.7968
Motor Width (mm)97
No. of Pump heads accepted4
Open-Head SensorNo
Power (Amps)2.2
Power (Hz)50/60
Power (VAC)90 to 260
Pump SeriesL/S
Remote I/O4 to 20 mA, 0 to 10 V, start/stop and direction via contact closure
Reversible motorYes
SpeedVariable
Speed Control0.25%
Type of Pump heads acceptedL/S Standard, Easy-Load, Easy-Load II, Easy-Load 3, High-Performance, Cartridge, Multichannel, PTFE-Tubing, PTFE-Diaphragm
Instruction Manual
Data Sheet
View Virtual Catalog - English - gy44-0713.pdf
Overview
  • Modular drives let you place motor and controller where convenient—ideal for limited spaces, hoods, or isolation chambers
  • Flow rate 0.06 to 3400 mL/min (depends on drive rpm and tubing size)
  • Three-digit LED display shows motor rpm—confirm speed setting at a glance
  • Membrane keypad for easy up-front control of speed, direction, and start/stop

More features

  • Reversible motor; purge tubing before or after pumping; pump fluid in either direction
  • LED indicators confirm motor direction
  • Powerful motors let you stack 2 or 4 pump heads for increased flow rates and for multichannel applications
  • Separate speed and power (on/off) control; maintain speed setting while turning pump on/off
  • ±0.25% speed control; meter and transfer fluids with accuracy and repeatability
  • Remote control capabilities via a DB9 female connector on back of drive: Speed control input 4 to 20 mA or 0 to 10 V; Pump direction (CW/CCW) via open collector or contact closure; Start/stop via open collector or contact closure
  • Splash-resistant ABS plastic controller housing is IP33 rated; drive housing is epoxy finished steel, IP33 rated
  • 6-ft (1.8-m) cable connects drive and controller; use optional extension cable 07557-51 to extend to 15 ft (4.6 m)

L/S® modular drives feature reversible pumping and allow you the flexibility to separate the motor from the controller. These accurate modular drives have powerful motors, speed display, and ±0.25% speed control for precise flow regulation—ideal for metering applications.



Whats Included:

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.

Over 40,000 Customers Trust John Morris