Model:086C03 - General purpose Modal Analysis impact hammer. 8 kHz frequency range 500 lb amplitude range 10 mV/lb sensitivity, 0.3 lb hammer mass, 0.6 inch head diameter._1103733
Representative image only

Model:086C03 - General purpose Modal Analysis impact hammer. 8 kHz frequency range 500 lb amplitude range 10 mV/lb sensitivity, 0.3 lb hammer mass, 0.6 inch head diameter.

$2,804.85

The price is inclusive of GST
Constant Current Excitation2 to 20 mA
Discharge Time Constant≥2000 sec
Electrical Connection PositionBottom of Handle
Electrical ConnectorBNC Jack
Excitation Voltage20 to 30 VDC
Extender Mass Weight (English)2.6 oz
Extender Mass Weight (SI)75 gm
Hammer Length (English)8.5 in
Hammer Length (SI)21.6 cm
Hammer Mass (English)0.34 lb
Hammer Mass (SI)0.16 kg
Head Diameter (English)0.62 in
Head Diameter (SI)1.57 cm
Measurement Range (English)±500 lbf pk
Measurement Range (SI)±2224 N pk
Non-Linearity≤1 %
Output Bias Voltage8 to 14 VDC
Output Impedance<100 Ohm
Resonant Frequency≥22 kHz
SealingEpoxy
Sensing ElementQuartz
Sensitivity (±15 %) (English)10 mV/lbf
Sensitivity (±15 %) (SI)2.25 mV/N
Tip Diameter (English)0.25 in
Tip Diameter (SI)0.63 cm
Drawing (PDF)
Overview

ICP® Impact Hammer
General purpose Modal Analysis impact hammer. 8 kHz frequency range 500 lb amplitude range 10 mV/lb sensitivity, 0.3 lb hammer mass, 0.6 inch head diameter.

 

Product Specifications
  ENGLISH SI  
Performance
    Sensitivity (±15 %) 10 mV/lbf 2.25 mV/N  
    Measurement Range ±500 lbf pk ±2224 N pk  
    Resonant Frequency ≥22 kHz ≥22 kHz  
    Non-Linearity ≤1 % ≤1 %  
Electrical
    Excitation Voltage 20 to 30 VDC 20 to 30 VDC  
    Constant Current Excitation 2 to 20 mA 2 to 20 mA  
    Output Impedance <100> <100> [1] 
    Output Bias Voltage 8 to 14 VDC 8 to 14 VDC  
    Discharge Time Constant ≥2000 sec ≥2000 sec [1] 
Physical
    Sensing Element Quartz Quartz  
    Sealing Epoxy Epoxy  
    Hammer Mass 0.34 lb 0.16 kg  
    Head Diameter 0.62 in 1.57 cm  
    Tip Diameter 0.25 in 0.63 cm  
    Hammer Length 8.5 in 21.6 cm  
    Electrical Connection Position Bottom of Handle Bottom of Handle  
    Extender Mass Weight 2.6 oz 75 gm  
    Electrical Connector BNC Jack BNC Jack  
 

All specifications are at room temperature unless otherwise specified.

 

CE
Product Notes

[1] Typical.
[2] See PCB Declaration of Conformance PS068 for details.
Accessories:
Supplied
081B05 Mounting Stud (10-32 to 10-32) (2)
084A08 Extender - Steel, 0.6" Diameter (1)
084B03 Hard Tip- Hard (S.S) (1)
084B04 Hammer Tip- Medium (White Plastic) (1)
084C05 Hammer Tip- Soft (Black) (2)
084C11 Hammer Tip- Supersoft (Red) (2)
085A10 Vinyl Cover For Medium Tip (Blue) (2)
HCS-2 Calibration of Series 086 instrumented impact hammers (1)
Optional Versions:

(T) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4

  ENGLISH SI

(TLD) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4

  ENGLISH SI

Over 40,000 Customers Trust John Morris