An ideal solution for standard laboratory needs, providing deionized water directly from your tap water.
Key Benefits
- Compact and easy to use
- Battery-powered with no need for electric outlet
- Easy maintenance due to purification pack design
- Easy control of the water quality
- Low investment
- Simple installation
The Milli-DI system instantly provides pure water directly from your water supply.
The system is especially suitable for standard chemical applications,for the production of buffers and reagents, as well as microbiological culture media.
It can also be used as good pretreatment for the Simplicity systems.
The Milli-DI system meets the daily needs of users requiring low volumes of purified water, from 3 to 5 liters per day.
Simple installation
The system design allows easy installation in any laboratory. The wall-mounted system is simply
connected to the water supply.Installing your Milli-DI system will only take you a few minutes:
- Connect the adapter to the tubing, and then to the water supply
- Connect your system to the tubing
- No electric outlet needed (battery-powered)
Note: Tubing, fitting, 9-volt battery and tape are accessories provided with your Milli-DI system.
Specifications
Product water quality
- Resistivity: > 1 MΩ.cm at 25 °C
- Flow rate: 0.5 L/min to 0.7 L/min
Feedwater requirements
- 14 psi < Feedwater pressure < 70 psi
- Potable tap water
